ClearOne BMA CT

ClearOne BMA CT in UAE – Key Highlights

• Built-in acoustic echo cancellation, noise cancellation, and beam selection eliminate the need for per-beam processing in a DSP mixer – requiring fewer DSP mixer resources.
• Built-in 2×10 Watt into 8-ohm power amplifier conveniently drives loudspeakers.
• Enables multi-array setups that can utilize a single low channel count DSP mixer.
• Integrated features can significantly reduce system design complexity, simplify installation, streamline configuration and programming, consume less rack space, and lower cost.
• Daisy chain ceiling tiles via P-Link for larger conference setups – for simpler wiring and longer distances compared to networked “home run” connections.
• Adaptive steering (think of it as smart switching) – no need to adjust individual beams – for impeccable room coverage.
• Use P-Link to daisy chain additional peripherals such as wireless mics, USB Expanders, and GPIO Expanders.
• ClearOne’s BMA technologies are protected by at least a dozen patents and pending patent applications.
• Ceiling tiles and peripherals can be P-Linked with zero consumption of analog I/O and signal to process in the DSP mixer leaving those resources available for other needs.
• Supports three different ceiling grid types: 24-inch for the US, 600 mm, and 625 mm for international.
• Each ceiling tile microphone array supports long-distance P-Link mode with 650 feet (200 meters) between tiles, for a total cable reach of 1950 feet (600 meters).

ClearOne BMA CT in UAE – Applications

• Audio Conferencing
• Video Conferencing

ClearOne BMA CT is used in these Environments

• Boardrooms
• Conference rooms
• Training centers
• Lecture halls
• Courtrooms
• Telemedicine facilities

BMACT – Technical Specifications

• 24 microphones
• 1 Channel In (Uses P-Link channels or C-Link channels for speakers, no input channels in CP2)
• Number of Beams: Two patterns, either 5 or 6 beams
• Polar Pattern: Custom
• Frequency Response: 150Hz – 16kHz, +/- 3dB
• Dynamic Range: 150Hz – 16kHz, > 70dB

LED

• 4 LED indicators on one end of unit:
• Mute/Un-mute configuration with 8 color options, two blink patterns and warning indications

Configuration

• Beam enable/disable
• Acoustic Echo Cancellation (AEC) on/off
• Noise Cancellation (NC) on/off
• Filters
  • All Pass
  • Low Pass
  • High Pass
  • Notch
  • PEQ
• Automatic Level Control (ALC) on/off
• Gain adjust
• Mute on/off
• Auto gate/Manual gate

P-Link Peripheral Bus

• P-Link In & Out: Proprietary Network
• Ports Type: RJ-45
• Cable: RJ45 Cat5e, Cat6, Expandable
• Distance: Up to 650 ft.
• Daisy-Chain:
  • Up to 3 Array units and additional P-Link compatible devices with each supported CONVERGE Pro 2 unit in the same chain
  • Up to 6 Array units in the same chain with 2 supported CONVERGE Pro 2 units connected through C-Link
• Long Distance P-Link:
• – Increases P-Link distance from 200 ft. to 650 ft.; (200M) max cable distance between any two units; Cat6, 550 MHz, 23 AWG, solid conductor cable; Do not use Copper Clad Aluminum (CCA) cable

Power Selection Switch

• Type: Slide Switch
  • Slide toward P-Link to power device by P-Link
  • Slide toward PoE to power device by PoE Injector

Configuration & Administration Software

• Pro CONSOLE® Software

Mounting

• Drop in replacement for 24 in, 600mm, or 625mm ceiling tile

Power & Thermal

• Power Type: PoE
• Port Type: RJ-45
• Power Source: PoE Injector or equivalent
• PoE:
  – IEEE802.3at compliant devices providing 56V and 640 mA (36 W).
  – P-Link In – Mode B
  – PoE In – Mode A and Mode B
  *Each BMA CT requires its own 802.3at compliant power injector if loudspeakers are being used.
• Power Consumption:
  100-240VAC, 50/60Hz 9.1 Watt Typical without speaker amp 38W at max power 1kHz (2 x 10W)
  Thermal: 130 BTU/Hr at max power
  Operating Temperature: 14° F/-10° C to 104° F/40° C ambient temperature

Dimension & Weight (WxHxD)

• 24” BMA CT: 23.72 x 23.72 x 2.13” (602.5 x 602.5 x 54.1mm)
• 600 mm BMA CT: 23.33 x 23.33 x 2.13” (592.5 x 592.5 x 54.1 mm)
• Unit Weight: 7.7lbs (3.5kg)
• Shipping Weight: 11.5lbs (5.2kg)

Part Numbers

1. 910-3200-205: 24” White BMA CT
2. 910-3200-205-I: 600 mm White BMA CT

Supported CONVERGE® Pro 2

• 910-3200-001 CONVERGE Pro 2 128
• 910-3200-001-D CONVERGE Pro 2 128D
• 910-3200-002 CONVERGE Pro 2 128T
• 910-3200-002-D CONVERGE Pro 2 128TD
• 910-3200-003 CONVERGE Pro 2 128V
• 910-3200-003-D CONVERGE Pro 2 128VD
• 910-3200-005 CONVERGE Pro 2 48T
• 910-3200-006 CONVERGE Pro 2 48V
• 910-3200-008 CONVERGE Pro 2 48VT
• 910-3200-008-D CONVERGE Pro 2 48VTD
• 910-3200-004 CONVERGE Pro 2 120

Accessories

• 910-3200-202 PoE Power supply kit for BMA CT and BMA CTD
• 910-3200-204-50 50 ft RJ45 CAT6 Cable
• 910-3200-204-100 100 ft RJ45 CAT6 Cable
• 910-3200-204-150 150 ft RJ45 CAT6 Cable
• 910-3200-204-200 200 ft RJ45 CAT6 Cable
• 910-3200-205-01 Brackets to convert 600 to 625 mm

OfficePlus LLC is the authorized distributor and sales partner for ClearOne in the UAE. As part of the ClearOne partner program, our customers are offered the complete suite of ClearOne Professional Audio products including 910-3200-205-I: 600 mm White BMA CT & 910-3200-205: 24” White BMA CT at the, best price backed by warranty and support packages. Our customers in UAE are also informed of the latest product launches from the ClearOne Professional Audio division. Our Customers can also experience the latest ClearOne Beamforming Mic Array product line by an onsite live demonstration.

To connect with us drop in an email at ClearOne@OfficePlusUAE.com or call us on +971 2 6767019 to speak to our representative.