ClearOne Converge PA 460

ClearOne Converge PA 460 in UAE – Overview

CONVERGE PA 460 amplifier is a 4 Channel x 60 Watts, high-efficiency Class-D power audio amplifier for reliable amplification with the professional sound quality for conferencing, sound reinforcement, and distribution applications.
CONVERGE PA 460 amplifier is optimized to work with ClearOne’s DSP mixers, and it also works with any third-party mixer.

ClearOne Converge PA 460 in UAE – Key Highlights

• 4/8W speaker output
• 70V/100V Constant Voltage output*
• 4 x 60W output in Normal mode
• 2 x 120W output in Bridged Mode
• Compact form-factor, half-rack size, fan-less unit
• Efficient power consumption with auto-standby mode
• Ease of installation with software-free, plug-and-play configuration
• Control and protection options with LED indicators
• Works with ClearOne and 3rd party DSP mixers
• Supports conferencing, sound reinforcement and audio distribution applications

Inputs & Outputs

• Inputs: 4 Channel, Balanced audio input, 3.81mm Green Phoenix/Euroblock type male header, Push-on mini-terminal block
• Outputs: 4 Channel, Balanced audio output, 5.08mm Black Phoenix/Euroblock type male header, Push-on mini-terminal block
• Input Sensitivity: 20Hz – 22kHz @ 0dBu
• Output Modes: 4/8W and 70.7V/100V
• Max Rated Output: 4 x 60W @ sensitivity, in 4/8Ω & 70.7V/100V modes
• Max Rated Output, Bridged: 2 x 120W @ sensitivity, in 4/8Ω mode
• Max Rated Output, Bridged: 2 x 120W @ sensitivity, in 70.7V/100V mode
• Frequency Response: 20Hz – 22KHz (+/- 1dB)
• THD+N: 20Hz – 22kHz @ rated power, 4/8W, <0.08%
• Dynamic Range: 20Hz – 20kHz @ 0dB, >100dB, 8W, unweighted

Control

• Slide Switches: Single End, Bridged mode 70.7V mode 100V mode HPF mode @ 80Hz
• Potentiometer Adjustable: 0 to max @ rated power

Front Panel LED Indicators

• POWER: Power status indicator Blue light indicates power on
• CLIP: Clip status indicator Red light indicates clip status due to:
  – Input is too high, signal clip
  – Output peak detected
• SIGNAL PRESENT: Signal indicator Blue light indicates signal is present or passing out
• STANDBY: Standby mode status indicator Yellow light indicates Standby mode enables when no audio is present. The amplifier first enters Mute mode at 2 minutes, then into Standby mode at 10 minutes.
• LIMIT: Limit indicator Red light indicates gain reduction activation
• PROTECT/DISABLE: Protection or Disable status indicators Red light indicates Disabled/Mute/Protection mode Mute mode enables when no audio is present for 2 minutes Protection mode enables when temperature exceeds 185°F (85°C)

Power & Thermal

• Power Consumption: 42W Typical, Pink Noise @ 0 dBu, 8Ω
• Power Supply: AC input 100-240VAC, 50Hz/60Hz
• Thermal: 143 BTU/Hr Typical
• Temperature: 14°F to 104°F (-10°C to 40°C) (Ambient temperature)