ClearOne Converge Pro 2 128SR

Most advanced professional audio DSP platform

CONVERGE Pro 2 is the industry’s most advanced professional audio DSP platform for sound reinforcement applications. It outperforms in any size room, audio environment, and application.

ClearOne Converge Pro 2 128SR in UAE – Overview

The 128SR model mixer has 12 inputs, 8 outputs, USB audio; GPIO, RS-232, IP control interfaces; and P-Link and C-Link expansion buses.

Built-in Native Camera Tracking for ClearOne Unite cameras and many 3rd party cameras using RS-232 and Ethernet VISCA over IP
12 mic/line inputs
Reduced footprint and power consumption.
DARE™ feedback elimination.
Standalone and daisy-chained system.
Stack up units up to 144 Mic/Line inputs.
Expansion bus “C-Link” with 150 channels.
Configure and manage entire system with CONSOLE® software, Auto-discovery of devices, MatrixView™ for entire system, FlowView™ for visualized audio signal paths and System monitoring and troubleshooting.
Flexible control options include 3rd party control modules for integrated systems.
Acoustic Intelligence for better audio.
Advanced microphone gating.
“P-Link” bus to connect peripheral devices
Daisy-chain the CONVERGE Pro 2 with DIALOG® 20 USB 2-Channel Wireless Microphone System, and other peripheral devices through P-Link.

APPLICATIONS

Background Music
Sound Reinforcement
Live Sound

WORKSPACES

Specifications

CAMERA TRACKING

Supported Cameras: Unite 150, Unite 200, Unite 160, Unite 260 (One Camera per DSP)
Communication Protocol: VISCA
Communication options: Serial (RS-232) or Ethernet (VISCA over IP)

MIC/LINE INPUTS & OUTPUTS

Inputs: Balanced audio inputs, 3.81 mm Black color Phoenix/ Euroblock type male header, Push-on miniterminal block
Outputs: Balanced audio outputs, 3.81 mm Black color Phoenix/Euroblock type male header, Push-on miniterminal block
Frequency Response: 20 Hz – 22 kHz @ +4 dBu, +/- 0.5 dBu
EIN (Equivalent Input Noise): 20 kHz BW, max gain, Rs = 150 Ω, -126 dBu
THD + N (Total Harmonic Distortion + Noise):
- 20 Hz – 22 kHz @ +4 dBu, line level, 0.006 %
- 20 Hz – 22 kHz @ -56 dBu, mic level, < 0.04 %
Dynamic Range: 20 Hz – 20 kHz @ 0 dB, > 105 dB
Crosstalk (Mic/Line): Channel to Channel, stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, < -98 dB
Input Impedance: Balanced (line to ground), 2,2 kΩ, 1 %
Nominal Input Level: Adjustable -56 dB to 0 dB, 7 dB step coarse gain
Maximum Input Level: -65 dBu to 20 dBu
Phantom Power: 48 V, Impedance 6.81 kΩ
Output Impedance: Balanced (line to ground), 95 Ω, 1 %
Output Level: 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable)

ETHERNET

Port Type: RJ-45, 10/100 Mbps Ethernet Network, Auto Negotiation
IP address: IPv4 (IPv6 upgradeable through future s/w, f/w upgrade)

C-LINK EXPANSION BUS

Ports Type: RJ-45 (Cat 5e or Cat 6)
C-Link In & Out: Proprietary Expansion Bus
Audio: 150 Expansion channels
Cable: Solid core, factory terminated Cat 5e or 6 cable
Distance: Up to 80 ’ (24 M)

P-LINK PERIPHERAL BUS

Ports Type: RJ-45 (Cat 5e or Cat 6)
P-Link In & Out: Proprietary Peripheral Bus
PoE In:
- P-Link In Port
- PoE 802.3 af Mode B, Midspan
- Power on “spare pairs” 4, 5 and 7, 8
- Input voltage range: 48 V to 56 V
Audio: Up to 3 DIALOG 20 Wireless Receiver units + Up to 3 USB Expander units + Up to 3 GPIO Expander units
Cable: Solid core, factory terminated Cat 5e or 6 cable
Distance: Up to 200 ’ (60M)

RS-232

Port Type: DB9 Female
Settings: 9600/19200/38400/57600/115200 Baud; Serial Echo; Flow Control
Support: Serial commands

GPIO

Port Type: 5.08 mm Green color Phoenix/Euroblock type male header
Support: Control, Status, Variable Voltage Control
Power Pin: 5 VDC @ 350 mA Power Source
Pin 1 to 4:
- Open Collector Outputs: 40 VDC @ 250 mA
- Active Outputs (Source/Sink): 5 VDC @25 mA
- Logic Inputs: 40.2 kΩ pull up
- Variable Voltage Control Inputs: 5 VDC max
Ground Pin: GND

USB CONTROL

Port Type: USB-B connector
Location: Front Panel
Compatible: USB 2.0, USB 3.0

LEDs

Location: Front Panel
Status LED:
- Off: Unit still initializing
- Blue – Fast Blinking: Stack Syncing in progress
- Blue – Slow Blinking: Unit not configured
- Blue – Solid: Configured unit
- Red – Fast Blinking: Stack Sync error
Locate LED: Blue – Blinking: Unit “Locate” command received
Power LED: Blue – Solid: Unit is powered on

TOUCH SENSOR

Sensor Type: Capacitive Touch Button
Location: Front Panel

POWER & THERMAL

Port Type: AC Inlet
Mains Voltage: 100-240 VAC, 50/60 Hz
Power Consumption: 50 Watts Typical
Thermal: 170 BTU/Hr Typical
Operating Temperature: 14 °F (-10 °C) to 104 °F (40 °C) Ambient Temperature

DIMENSION & WEIGHT

RU size: 1 RU
Width x Depth x Height:
- Without rack-ears: 17 x 10.7 x 1.7 “ (431 x 273 x 44 mm)
- With rack-ears: 19 x 10.7 x 1.7 “ (483 x 273 x 44 mm)
Unit Weight: 9.3 lbs (4.2 Kg) (Approximately)
Shipping Weight: 13.8 lbs (6.3 Kg) (Approximately)

PACKAGE

Power Cord: 6 ’ (1.8 M), Grounded, Qty 1
Input Connectors: Terminal Block Connector, 4 Position (Orange), Qty 12
GPIO Connector: Terminal Block Connector, 6 Position (Green), Qty 1
C-Link Cable: RJ-45 To RJ-45 Cable, 18 ” (45.7 cm), Qty 1
USB Cable: USB Type A to Type B, 6 ’ (1.8 M), Qty 1
Rack Ears: Pre-installed, Qty 2
Screw/Washer Kit: Rack Decor, Qty 4

OfficePlus LLC is the authorized distributor and sales partner for ClearOne in the UAE. As part of the ClearOne partner program, our customers are offered the complete suite of ClearOne Professional Audio products including CONVERGE Pro 2 128SR in UAE, at the best price backed by warranty and support packages. Our customers in UAE are also informed of the latest product launches from the ClearOne Professional Audio division. Our Customers can also experience the latest ClearOne Converge Pro 128SR in UAE product line by an onsite live demonstration.

To connect with us drop in an email atClearOne@OfficePlusUAE.com or call us on +971 2 6767019 to speak to our representative.